cadding.io WebMCP Tools, Schemas & Agent Capabilities

← WebMCP Directory

cadding.io

live Unverified (seed import) AI & Agents 60 tools imperative implementation

Open website How verification works

AI CAD for 3D printing in the browser. Turn prompts into editable models and export in minutes.

First seen 2026-11-05 · Last seen 2026-11-05 · Source: webmcp.com

Answer 12 · Act 47 · Transact 1 · Score: Not yet scored

Tool inspector

cad.split_part

act imperative

Cut one part into two pieces with a plane. Use axis for the cut direction, and ratio 0–1 for where the cut sits (0.5 = halfway). Prefer ratio; use offsetMm only when you need an exact millimeter offset from the part center.

Page: /editor

Input schema

Property	Type	Required	Description
`targetPartId`	string	yes	Stable ID of the part to inspect or modify.
`axis`	string	yes	Local cut direction. z = top/bottom split (height). x / y = side splits (width / depth).
`ratio`	number	no	Where to cut along the axis, from 0 to 1. 0.5 = middle. Do NOT use 50 — that is wrong. Example: 0.5 for half, 0.25 for one-quarter from the low end.
`offsetMm`	number	no	Optional exact cut offset in millimeters from the part center. Leave empty when using ratio.

Raw JSON schema

{
  "type": "object",
  "title": "split part",
  "description": "Arguments for split_part.",
  "properties": {
    "targetPartId": {
      "type": "string",
      "description": "Stable ID of the part to inspect or modify."
    },
    "axis": {
      "type": "string",
      "description": "Local cut direction. z = top/bottom split (height). x / y = side splits (width / depth).",
      "enum": [
        "x",
        "y",
        "z"
      ],
      "default": "z"
    },
    "ratio": {
      "type": "number",
      "description": "Where to cut along the axis, from 0 to 1. 0.5 = middle. Do NOT use 50 — that is wrong. Example: 0.5 for half, 0.25 for one-quarter from the low end.",
      "default": 0.5
    },
    "offsetMm": {
      "type": "number",
      "description": "Optional exact cut offset in millimeters from the part center. Leave empty when using ratio."
    }
  },
  "required": [
    "targetPartId",
    "axis"
  ],
  "additionalProperties": false
}