cadding.io WebMCP Tools, Schemas & Agent Capabilities

← WebMCP Directory

cadding.io

live Unverified (seed import) AI & Agents 60 tools imperative implementation

Open website How verification works

AI CAD for 3D printing in the browser. Turn prompts into editable models and export in minutes.

First seen 2026-11-05 · Last seen 2026-11-05 · Source: webmcp.com

Answer 12 · Act 47 · Transact 1 · Score: Not yet scored

Tool inspector

cad.add_connector

act imperative

Place a mechanical connector. Complete hardware (hinge, pin-hinge, thread, twist-lock) can omit targetPartId and sit on the plate as its own part. Face features (holes, snaps, studs) still need a host part and usually a face.

Page: /editor

Input schema

Property	Type	Required	Description
`targetPartId`	string	no	Stable ID of the part to inspect or modify.
`connectorType`	string	yes	Ready mechanical Connect-tool kind. Screw Hole pairs with Screw at the same M-size; snap types pair tab+slot; press-fit peg/hole pair; stud-grid places an 8 mm-pitch stud array (mate click cuts sockets); magnet-pocket takes a disc magnet; hinge places a complete flush hinge (both leaves + pin) as its own part — no host face required. joint-pin-hinge is a legacy alias of hinge. Legacy snap-male / snap-female aliases map to snap-tab / snap-slot.
`connectorSizeMm`	number	no	Feature size in millimeters.
`face`	string	no	Host face label (Top/Bottom/Front/Back/Left/Right, Face N, or interior:*).
`type`	string	no	Legacy alias for connectorType.
`sizeMm`	number	no	Legacy alias for connectorSizeMm.
`studsX`	number	no	Stud grid columns for connector-stud-grid. Default 2.
`studsY`	number	no	Stud grid rows for connector-stud-grid. Default 4.
`fit`	string	no	FDM clutch fit for stud-grid sockets. Default normal.
`variant`	string	no	Studs (male) or sockets (female) for connector-stud-grid.

Raw JSON schema

{
  "type": "object",
  "title": "add connector",
  "description": "Arguments for add_connector.",
  "properties": {
    "targetPartId": {
      "type": "string",
      "description": "Stable ID of the part to inspect or modify."
    },
    "connectorType": {
      "type": "string",
      "description": "Ready mechanical Connect-tool kind. Screw Hole pairs with Screw at the same M-size; snap types pair tab+slot; press-fit peg/hole pair; stud-grid places an 8 mm-pitch stud array (mate click cuts sockets); magnet-pocket takes a disc magnet; hinge places a complete flush hinge (both leaves + pin) as its own part — no host face required. joint-pin-hinge is a legacy alias of hinge. Legacy snap-male / snap-female aliases map to snap-tab / snap-slot.",
      "enum": [
        "fastener-screw",
        "fastener-screw-hole",
        "fastener-bolt-hole",
        "fastener-countersink",
        "fastener-counterbore",
        "fastener-nut-trap",
        "fastener-heatset",
        "fastener-standoff",
        "connector-peg-hole",
        "connector-alignment-pin",
        "connector-alignment-pin-hole",
        "connector-snap-tab",
        "connector-snap-slot",
        "connector-magnet-pocket",
        "connector-stud-grid",
        "press-fit-male",
        "press-fit-female",
        "joint-hinge",
        "joint-pin-hinge",
        "snap-male",
        "snap-female"
      ]
    },
    "connectorSizeMm": {
      "type": "number",
      "description": "Feature size in millimeters.",
      "default": 5
    },
    "face": {
      "type": "string",
      "description": "Host face label (Top/Bottom/Front/Back/Left/Right, Face N, or interior:*)."
    },
    "type": {
      "type": "string",
      "description": "Legacy alias for connectorType."
    },
    "sizeMm": {
      "type": "number",
      "description": "Legacy alias for connectorSizeMm."
    },
    "studsX": {
      "type": "number",
      "description": "Stud grid columns for connector-stud-grid. Default 2."
    },
    "studsY": {
      "type": "number",
      "description": "Stud grid rows for connector-stud-grid. Default 4."
    },
    "fit": {
      "type": "string",
      "description": "FDM clutch fit for stud-grid sockets. Default normal.",
      "enum": [
        "tight",
        "normal",
        "loose"
      ]
    },
    "variant": {
      "type": "string",
      "description": "Studs (male) or sockets (female) for connector-stud-grid.",
      "enum": [
        "male",
        "female"
      ]
    }
  },
  "required": [
    "connectorType"
  ],
  "additionalProperties": false
}