autolab.run

start_run

Start the run mode, as the tray's PLAY does: the Tesla Roadster at the start line at the foot of the wall-ride ramp, 8 m before the curl, which turns vertical 9 m up and runs on upside down to an overhang 21.6 m up (the hop autopilot starts 30 m back), in drive mode with a chase camera. A real-time simulation decides whether the car makes the wall ride or falls off it, and whether a hop lands. Switches the Garage to the Roadster first if another vehicle is on the sheet. Without autopilot the car waits for set_drive_inputs or a person's keys; autopilot "wallride" drives the reveal's wall ride (fans on, about 20 ft/s up the wall, a hang upside down on the overhang, then off the tip on the jets) and "hop" the thruster hop (8.5 m up on the corner jets and down again); any input takes over from the autopilot (set_drive_inputs with only fans or wing leaves it driving). A run already on starts again from its start line. The tools that move the drawing's own views, camera or motions (set_view, set_motion, set_camera, orbit_camera, frame_part, highlight_part, frame_point) end the run first, as stop_run does. Returns get_run_state.

Page: /garage/?vehicle=roadster&play=1

Input schema

{
  "type": "object",
  "properties": {
    "autopilot": {
      "type": "string",
      "enum": [
        "wallride",
        "hop"
      ]
    }
  },
  "additionalProperties": false
}